The lubrication system of gas turbine generator is a very important system, so it is necessary to maintain the lubrication system of gas turbine generator.

　　1.选择合适的油。每台柴油bat365官方网站登录的技术条件规定了润滑油的种类。在使用过程中要注意这一点，如果在使用过程中，没有说明书上指定的润滑油，可以选择类似品牌的润滑油，不要混合不同品牌的润滑油。

　　1. Choose the right oil. The technical conditions of each diesel generator specify the type of lubricating oil. Pay attention to this point in the use process. If there is no lubricating oil specified in the instructions, you can choose similar brands of lubricating oil, and do not mix different brands of lubricating oil.

　　2.确保你有适量的油。每次开机前应检查燃气发生器油位，确保油位高度在规定范围内。过低的油位会造成瓦片的磨损，容易烧坏气缸。高油位会导致油进入气缸，燃烧室积碳，活塞环粘连，排出蓝色烟雾。

　　2. Make sure you have the right amount of oil. Check the oil level of gas generator before each startup to ensure that the oil level is within the specified range. Too low oil level will cause the wear of tiles and easily burn the cylinder. High oil level will cause oil to enter the cylinder, carbon deposition in the combustion chamber, piston ring adhesion, and exhaust blue smoke.

　　3.适当调整油压。每台柴油bat365官方网站登录都有自己规定的油压。当启动到额定或中速时，油压应在1min内升至规定值。否则，应查明原因，并将油压调整到规定的值范围内。

　　3. Adjust the oil pressure properly. Each diesel generator has its own specified oil pressure. When starting to rated or medium speed, the oil pressure shall rise to the specified value within 1min. Otherwise, find out the cause and adjust the oil pressure to the specified value.

　　4.在使用过程中要经常检查油的质量。燃气bat365官方网站登录组机械杂质检查:对发动机加热时应进行油中机械杂质检查。检查时，取出油标尺到光亮处查看，如发现油标尺上有小颗粒或油标尺上看不到油，则说明油杂质太多。也可以用手拧油看是否有油粒，来判断油是否可以用，如果油出现黑色或杂质过多，应更换油并清洗滤油器。

　　4. Check the quality of oil frequently during use. Inspection for mechanical impurities of gas generator unit: when heating the engine, the mechanical impurities in the oil shall be inspected. During the inspection, take out the dipstick to the bright place to check. If there are small particles on the dipstick or no oil can be seen on the dipstick, it means that there are too many oil impurities. It can also be used to screw the oil by hand to see if there are oil particles, so as to judge whether the oil can be used. If the oil appears black or there are too many impurities, replace the oil and clean the oil filter.

　　5.滑油粘度检查:检查油粘度、精确的方法似乎与粘度计测量,但通常更常用的方法是将石油在手指读错了,如粘度的感觉,并拉长丝现象,滑油粘度适当,否则这意味着石油粘度是不够的,应该找出原因,换机油。

　　5. Inspection of oil viscosity: it seems that the inspection of oil viscosity and the accurate method are measured with viscometer, but the more commonly used method is to read the oil wrong in the fingers, such as the feeling of viscosity, and stretch the filament phenomenon. The viscosity of oil is appropriate, otherwise it means that the viscosity of oil is not enough. It is necessary to find out the reason and change the oil.

　　以上是燃气bat365官方网站登录组厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：

　　The above is the relevant content introduced by the gas generator unit manufacturer. For more information, please visit the website: